This article should specify the language of its non-English content, using {{lang}}, {{transliteration}} for transliterated languages, and {{IPA}} for phonetic transcriptions, with an appropriate ISO 639 code. Wikipedia's multilingual support templates may also be used.See why.(April 2021)
Ṭha (also romanized as Ttha) is a consonant of Indic abugidas. In modern Indic scripts, Ṭha is derived from the early "Ashoka" Brahmi letter after having gone through the Gupta letter . As with the other cerebral consonants, ṭha is not found in most scripts for Tai, Sino-Tibetan, and other non-Indic languages, except for a few scripts, which retain these letters for transcribing Sanskrit religious terms.
Aryabhata used Devanagari letters for numbers, very similar to the Greek numerals, even after the invention of Indian numerals. The values of the different forms of ठ are:[1]
There are three different general early historic scripts - Brahmi and its variants, Kharoṣṭhī, and Tocharian, the so-called slanting Brahmi. Ttha as found in standard Brahmi, was a simple geometric shape, and did not vary much throughout the centuries. The Tocharian Ttha did not have an alternate Fremdzeichen form. The third form of ttha, in Kharoshthi () was probably derived from Aramaic separately from the Brahmi letter.
Brahmi Ttha
The Brahmi letter , Ttha, is probably derived from the altered Aramaic Teth, and is thus related to the modern Greek Theta.[2] Several identifiable styles of writing the Brahmi Ttha can be found, most associated with a specific set of inscriptions from an artifact or diverse records from an historic period.[3] As the earliest and most geometric style of Brahmi, the letters found on the Edicts of Ashoka and other records from around that time are normally the reference form for Brahmi letters, with vowel marks not attested until later forms of Brahmi back-formed to match the geometric writing style.
Ṭha (ठ) is a consonant of the Devanagariabugida. It ultimately arose from the Brahmi letter , after having gone through the Gupta letter . Letters that derive from it are the Gujarati letter ઠ, and the Modi letter 𑘙.
Devanagari-using Languages
In all languages, ठ is pronounced as [ʈʰə] or [ʈʰ] when appropriate. Like all Indic scripts, Devanagari uses vowel marks attached to the base consonant to override the inherent /ə/ vowel:
Devanagari ठ with vowel marks
Ṭha
Ṭhā
Ṭhi
Ṭhī
Ṭhu
Ṭhū
Ṭhr
Ṭhr̄
Ṭhl
Ṭhl̄
Ṭhe
Ṭhai
Ṭho
Ṭhau
Ṭh
ठ
ठा
ठि
ठी
ठु
ठू
ठृ
ठॄ
ठॢ
ठॣ
ठे
ठै
ठो
ठौ
ठ्
Conjuncts with ठ
Devanagari exhibits conjunct ligatures, as is common in Indic scripts. In modern Devanagari texts, most conjuncts are formed by reducing the letter shape to fit tightly to the following letter, usually by dropping a character's vertical stem, sometimes referred to as a "half form". Some conjunct clusters are always represented by a true ligature, instead of a shape that can be broken into constituent independent letters. Vertically stacked conjuncts are ubiquitous in older texts, while only a few are still used routinely in modern Devanagari texts. Lacking a vertical stem to drop for making a half form, Ṭha either forms a stacked conjunct/ligature, or uses its full form with Virama. The use of ligatures and vertical conjuncts may vary across languages using the Devanagari script, with Marathi in particular avoiding their use where other languages would use them.[4]
Ligature conjuncts of ठ
True ligatures are quite rare in Indic scripts. The most common ligated conjuncts in Devanagari are in the form of a slight mutation to fit in context or as a consistent variant form appended to the adjacent characters. Those variants include Na and the Repha and Rakar forms of Ra. Nepali and Marathi texts use the "eyelash" Ra half form for an initial "R" instead of repha.
Vertically stacked ligatures are the most common conjunct forms found in Devanagari text. Although the constituent characters may need to be stretched and moved slightly in order to stack neatly, stacked conjuncts can be broken down into recognizable base letters, or a letter and an otherwise standard ligature.
The Bengali script ঠ is derived from the Siddhaṃ, and is marked by a similar horizontal head line, but less geometric shape, than its Devanagari counterpart, ठ. The inherent vowel of Bengali consonant letters is /ɔ/, so the bare letter ঠ will sometimes be transliterated as "ttho" instead of "ttha". Adding okar, the "o" vowel mark, gives a reading of /t̳ʰo/.
Like all Indic consonants, ঠ can be modified by marks to indicate another (or no) vowel than its inherent "a".
Bengali ঠ with vowel marks
ttha
tthā
tthi
tthī
tthu
tthū
tthr
tthr̄
tthe
tthai
ttho
tthau
tth
ঠ
ঠা
ঠি
ঠী
ঠু
ঠূ
ঠৃ
ঠৄ
ঠে
ঠৈ
ঠো
ঠৌ
ঠ্
ঠ in Bengali-using languages
ঠ is used as a basic consonant character in all of the major Bengali script orthographies, including Bengali and Assamese.
Conjuncts with ঠ
Bengali ঠ exhibits conjunct ligatures, as is common in Indic scripts. Conjunct ligatures with ঠ are all based on the ঠ glyph, with little to no alteration aside from the addition of marks suggesting the conjoining letter.[5]
ণ্ (ṇ) + ঠ (ṭʰa) gives the ligature ṇṭʰa:
ণ্ (ṇ) + ঠ্ (ṭʰ) + য (ya) gives the ligature ṇṭʰya, with the ya phala suffix:
ন্ (n) + ঠ (ṭʰa) gives the ligature nṭʰa:
ষ্ (ṣ) + ঠ (ṭʰa) gives the ligature ṣṭʰa:
ষ্ (ṣ) + ঠ্ (ṭʰ) + য (ya) gives the ligature ṣṭʰya, with the ya phala suffix:
Gujarati Ṭha
Ṭha (ઠ) is the twelfth consonant of the Gujaratiabugida. It is derived from the Devanagari Ṭha with the top bar (shiro rekha) removed, and ultimately the Brahmi letter .
Gujarati-using Languages
The Gujarati script is used to write the Gujarati and Kutchi languages. In both languages, ઠ is pronounced as [ʈʰə] or [ʈʰ] when appropriate. Like all Indic scripts, Gujarati uses vowel marks attached to the base consonant to override the inherent /ə/ vowel:
Ṭha
Ṭhā
Ṭhi
Ṭhī
Ṭhu
Ṭhū
Ṭhr
Ṭhl
Ṭhr̄
Ṭhl̄
Ṭhĕ
Ṭhe
Ṭhai
Ṭhŏ
Ṭho
Ṭhau
Ṭh
Gujarati Ṭha syllables, with vowel marks in red.
Conjuncts with ઠ
Gujarati ઠ exhibits conjunct ligatures, much like its parent Devanagari Script. While most Gujarati conjuncts can only be formed by reducing the letter shape to create a "half form" that fits tightly to following letter, Ṭha does not have a half form. A few conjunct clusters can be represented by a true ligature, instead of a shape that can be broken into constituent independent letters, and vertically stacked conjuncts can also be found in Gujarati, although much less commonly than in Devanagari. Lacking a half form, Ṭha will normally use an explicit virama when forming conjuncts without a true ligature.
True ligatures are quite rare in Indic scripts. The most common ligated conjuncts in Gujarati are in the form of a slight mutation to fit in context or as a consistent variant form appended to the adjacent characters. Those variants include Na and the Repha and Rakar forms of Ra.
ર્ (r) + ઠ (ʈʰa) gives the ligature RṬha:
ઠ્ (ʈʰ) + ર (ra) gives the ligature ṬhRa:
ઠ્ (ʈʰ) + ઠ (ʈʰa) gives the ligature ṬhṬha:
ટ્ (ʈ) + ઠ (ʈʰa) gives the ligature ṬṬha:
ષ્ (ʂ) + ઠ (ʈʰa) gives the ligature ṢṬha:
Telugu Ṭha
Telugu independent and subjoined Ṭha.
Ṭha (ఠ) is a consonant of the Teluguabugida. It ultimately arose from the Brahmi letter . It is closely related to the Kannada letter ಠ. Most Telugu consonants contain a v-shaped headstroke that is related to the horizontal headline found in other Indic scripts, although headstrokes do not connect adjacent letters in Telugu. The headstroke is normally lost when adding vowel matras.
Telugu conjuncts are created by reducing trailing letters to a subjoined form that appears below the initial consonant of the conjunct. Many subjoined forms are created by dropping their headline, with many extending the end of the stroke of the main letter body to form an extended tail reaching up to the right of the preceding consonant. This subjoining of trailing letters to create conjuncts is in contrast to the leading half forms of Devanagari and Bengali letters. Ligature conjuncts are not a feature in Telugu, with the only non-standard construction being an alternate subjoined form of Ṣa (borrowed from Kannada) in the KṢa conjunct.
Malayalam Ṭha
Ṭha (ഠ) is a consonant of the Malayalamabugida. It ultimately arose from the Brahmi letter , via the Grantha letter Ttha. Like in other Indic scripts, Malayalam consonants have the inherent vowel "a", and take one of several modifying vowel signs to represent syllables with another vowel or no vowel at all.
Conjuncts of ഠ
As is common in Indic scripts, Malayalam joins letters together to form conjunct consonant clusters. There are several ways in which conjuncts are formed in Malayalam texts: using a post-base form of a trailing consonant placed under the initial consonant of a conjunct, a combined ligature of two or more consonants joined together, a conjoining form that appears as a combining mark on the rest of the conjunct, the use of an explicit candrakkala mark to suppress the inherent "a" vowel, or a special consonant form called a "chillu" letter, representing a bare consonant without the inherent "a" vowel. Texts written with the modern reformed Malayalam orthography, put̪iya lipi, may favor more regular conjunct forms than older texts in paḻaya lipi, due to changes undertaken in the 1970s by the Government of Kerala.
ണ് (ṇ) + ഠ (ṭʰa) gives the ligature ṇṭʰa:
ഷ് (ṣ) + ഠ (ṭʰa) gives the ligature ṣṭʰa:
Odia Ṭha
Odia independent and subjoined letter Ṭha.
Ṭha (ଠ) is a consonant of the Odiaabugida. It ultimately arose from the Brahmi letter , via the Siddhaṃ letter Ttha. Like in other Indic scripts, Odia consonants have the inherent vowel "a", and take one of several modifying vowel signs to represent syllables with another vowel or no vowel at all.
Odia Ttha with vowel matras
Ttha
Tthā
Tthi
Tthī
Tthu
Tthū
Tthr̥
Tthr̥̄
Tthl̥
Tthl̥̄
Tthe
Tthai
Ttho
Tthau
Tth
ଠ
ଠା
ଠି
ଠୀ
ଠୁ
ଠୂ
ଠୃ
ଠୄ
ଠୢ
ଠୣ
ଠେ
ଠୈ
ଠୋ
ଠୌ
ଠ୍
As is common in Indic scripts, Odia joins letters together to form conjunct consonant clusters. The most common conjunct formation is achieved by using a small subjoined form of trailing consonants. Most consonants' subjoined forms are identical to the full form, just reduced in size, although a few drop the curved headline or have a subjoined form not directly related to the full form of the consonant. The second type of conjunct formation is through pure ligatures, where the constituent consonants are written together in a single graphic form. ଠ generates conjuncts only by subjoining and does not form ligatures.
Kaithi Ṭha
Kaithi consonant Ṭha.
Ṭha (𑂘) is a consonant of the Kaithiabugida. It ultimately arose from the Brahmi letter , via the Siddhaṃ letter Ttha. Like in other Indic scripts, Kaithi consonants have the inherent vowel "a", and take one of several modifying vowel signs to represent syllables with another vowel or no vowel at all.
Kaithi Ttha with vowel matras
Ttha
Tthā
Tthi
Tthī
Tthu
Tthū
Tthe
Tthai
Ttho
Tthau
Tth
𑂘
𑂘𑂰
𑂘𑂱
𑂘𑂲
𑂘𑂳
𑂘𑂴
𑂘𑂵
𑂘𑂶
𑂘𑂷
𑂘𑂸
𑂘𑂹
Conjuncts of 𑂘
As is common in Indic scripts, Kaithi joins letters together to form conjunct consonant clusters. The most common conjunct formation is achieved by using a half form of preceding consonants, although several consonants use an explicit virama. Most half forms are derived from the full form by removing the vertical stem. As is common in most Indic scripts, conjucts of ra are indicated with a repha or rakar mark attached to the rest of the consonant cluster. In addition, there are a few vertical conjuncts that can be found in Kaithi writing, but true ligatures are not used in the modern Kaithi script.
𑂩୍ (r) + 𑂘 (ṭʰa) gives the ligature rṭʰa:
Comparison of Ṭha
The various Indic scripts are generally related to each other through adaptation and borrowing, and as such the glyphs for cognate letters, including Ṭha, are related as well.
^The middle "Kushana" form of Brahmi is a later style that emerged as Brahmi scripts were beginning to proliferate. Gupta Brahmi was definitely a stylistic descendant from Kushana, but other Brahmi-derived scripts may have descended from earlier forms.
^Tocharian is probably derived from the middle period "Kushana" form of Brahmi, although artifacts from that time are not plentiful enough to establish a definite succession.
^Pyu and Old Mon are probably the precursors of the Burmese script, and may be derived from either the Pallava or Kadamba script
^May also be derived from Devangari (see bottom left of table)
^The Origin of Hangul from 'Phags-pa is one of limited influence, inspiring at most a few basic letter shapes. Hangul does not function as an Indic abugida.
^Although the basic letter forms of the Canadian Aboriginal Syllabics were derived from handwritten Devanagari letters, this abugida indicates vowel sounds by rotations of the letter form, rather than the use of vowel diacritics as is standard in Indic abugidas.
^Masaram Gondi acts as an Indic abugida, but its letterforms were not derived from any single precursor script.
Character encodings of Ṭha
Most Indic scripts are encoded in the Unicode Standard, and as such the letter Ṭha in those scripts can be represented in plain text with unique codepoint. Ṭha from several modern-use scripts can also be found in legacy encodings, such as ISCII.
^Ifrah, Georges (2000). The Universal History of Numbers. From Prehistory to the Invention of the Computer. New York: John Wiley & Sons. pp. 447–450. ISBN0-471-39340-1.
^note Conjuncts are identified by IAST transliteration, except aspirated consonants are indicated with a superscript "h" to distinguish from an unaspirated cononant + Ha, and the use of the IPA "ŋ" and "ʃ" instead of the less dinstinctive "ṅ" and "ś".